Product ID:IONAC NM-60
MSDS Date:06/22/1999
FSC:6810
NIIN:01-029-4217
Status Code:A
MSDS Number: CKPSP

Emergency Phone: 800-678-0020

Info Phone: 609-893-1100

Cage: 76465

Telephone: 609-893-1100

Cage: 76465

BENZENE, DIETHENYL-, POLYMER WITH ETHENYLBENZENE AND

CAS: 69011-18-3

BENZENE, DIETHENYL-, POLYMER WITH ETHENYLBENZENE AND

CAS: 69011-20-7

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:VERY SLIGHTLY HAZARDOUS IN CASE OF EYE
CONTACT (IRRITANT). NON-IRRITANT FOR SKIN.
Explanation of Carcinogenicity:NONE LISTED.
Effects of Overexposure:VERY SLIGHTLY HAZARDOUS IN CASE OF EYE CONTACT
(IRRITANT). NON-IRRITANT FOR SKIN.

First Aid:EYES: MILDLY IRRITATING TO THE EYES. SKIN: NO KNOWN EFFECT ON
SKIN CONTACT, RINSE WITH WATER FOR A FEW MINUTES. INHALATION: ALLOW
THE VICTIM TO REST IN A WELL VENTILATED AREA. SEEK IMMEDIATE
MEDICAL A TTENTION. INGESTION: NOT APPLICABLE.

Autoignition Temp:>500.C, 932.F
Extinguishing Media:SMALL FIRE-USE DRY CHEMICAL POWDER. LARGE FIRE-USE
WATER SPRAY, FOG, OR FOAM. DO NOT USE WATER JET.
Fire Fighting Procedures:BE SURE TO USE AN APPROVED/CERTIFIED
RESPIRATOR OR EQUIVALENT.
Unusual Fire/Explosion Hazard:MAY BE COMBUSTIBLE AT HIGH TEMPERATURE.
HIGHLY EXPLOSIVE IN PRESENCE OF OXIDIZING MATERIALS. HAZARDOUS
COMBUSTION PRODUCTS: CARBON OXIDES (CO, CO2).

Spill Release Procedures:WEAR SAFETY GLASSES, GLOVES. USE APPROPRATE
TOOLS TO PUT THE SPILLED SOLID IN A CONVENIENT WASTE DISPOSAL
CONTAINER.

Handling and Storage Precautions:KEEP CONTAINER DRY. KEEP IN A COOL
PLACE. GROUND ALL EQUIPMENT CONTAINING MATERIAL. KEEP CONTAINER
TIGHTLY CLOSED. KEEP IN A COOL, WELL-VENTILATED PLACE. COMBUSTIBLE
MATERIAL SHOULD BE STORED AWAY FRO M EXTREME HEAT AND AWAY FROM
STRONG OXIDIZING AGENTS.
Other Precautions:AVOID BREATHING DUST.

Ventilation:USE PROCESS ENCLOSURES, LOCAL EXHAUST VENTILATION, OR OTHER
ENGINEERING CONTROLS TO KEEP AIRORNE LEVELS BELOW RECOMMENDED
EXPOSURE LIMITS.
Supplemental Safety and Health
IF USER OPERATIONS GENERATE DUST, FUME OR MIST, USE VENTILATION TO KEEP
EXPOSURE TO AIRBORNE CONTAMINANTS BELOW THE EXPOSURE LIMIT.

HCC:N1
Vapor Density:0.62
Spec Gravity:1.2(WATER=1)
pH:6 TO 9 (BASIC)
Evaporation Rate & Reference:1(BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE IN COLD WATER
Appearance and Odor:BEADS SOLID. FISH (SLIGHT) ODOR.

Stability Indicator/Materials to Avoid:YES
HIGHLY REACTIVE WITH OXIDIZING AGENTS.
Stability Condition to Avoid:OXIDIZING AGENTS.
Hazardous Decomposition Products:CARBON OXIDES (CO, CO2).
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:CONSULT YOU LOCAL OR REGIONAL AUTHORITIES. AS
SUPPLIED, NEW OR USED ION EXCHANGE RESINS GENERALLY ARE NOT
HAZARDOUS AND THEREFORE ARE NOT CONSIDERED AS HAZARDOUS WASTES.
USED RESINS MAY MEET THE REGUL ATORY DEFINITION OF HAZARDOUS WASTES
AS A RESULT OF THEIR SERVICE. (REFER TO 40 CFR261).

Toxicological Information:NOT APPLICABLE.

Transport Information:NOT REGULATED.

SARA Title III Information:NOT LISTED IN SARA SEC 302, 304, OR 313.
State Regulatory Information:

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.